Husqvarna DC 6000 Dust Extractor 967625003, 480V, 3PH
Safety Information
Husqvarna DC 6000 Dust Extractor
Protective equipment
General
Do not use the machine unless you are able to call for help
in the event of an accident.
Personal protective equipment
You must use approved personal protective equipment whenever you use the machine. Personal protective equipment cannot eliminate the risk of injury but it will
reduce the degree of injury if an accident does happen.
Ask your dealer for help in choosing the right equipment.
WARNING! The use of products such as cutters, grinders, drills, that sand or form
material can generate dust and vapors which may contain hazardous chemicals.
Check the nature of the material you intend to process and use an appropriate
breathing mask.
WARNING! Long-term exposure to noise can result in permanent hearing impairment. So always use approved hearing protection. Listen out for warning signals or shouts when you are
wearing hearing protection. Always remove your hearing protection as soon as the engine stops.
WARNING! There is always a risk of crush injuries when working with
products containing moving parts. Wear protective gloves to avoid body injuries.
Always wear:
• Protective helmet
• Hearing protection
• Protective goggles or a visor
• Breathing mask
• Heavy-duty, firm grip gloves.
• Tight-fitting, heavy-duty and comfortable clothing that permits full freedom of movement.
• Boots with steel toe-caps and non-slip sole
Be careful as clothing, long hair, and jewelry can get caught in moving parts.
Other protective equipment
•Fire fighting equipment
• Always have a first aid kit nearby.
General safety precautions
WARNING! Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
This section describes basic safety directions for using the machine. This information is never a substitute for professional skills and experience.
• Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.
Save all warnings and instructions for future reference.
• Keep in mind that the operator is responsible for accidents or hazards occuring to other people or their property.
• All operators shall be trained in the use of the machine. The owner is responsible for ensuring that the operators receive training.
• The machine must be kept clean. Signs and stickers must be fully legible.
WARNING! The machine can be a dangerous tool if used incorrectly or
carelessly, which can cause serious or fatal injury to the operator or others.
Never allow children or other persons not trained in the use of the machine to
use or service it. Never allow anyone else to use the machine without first ensuring that they have read and understood the contents of the operator’s manual.
Children shall not play with the appliance.
Never use the machine if you are fatigued, while under the influence of
alcohol or drugs, medication or anything that could affect your vision, alertness, coordination or judgement.
There is always a risk of shocks from electrically powered machines. Avoid
unfavorable weather conditions and body contact with lightning conductors
and metal objects. Always follow the instructions in the Operator’s manual to
avoid damage.
WARNING! Unauthorized modifications and/or accessories may lead to serious
injury or death to the user or others.
Do not modify this product or use it if it appears to have been modified by others.
Never use a machine that is faulty. Carry out the safety checks, maintenance and
service instructions described in this manual. Some maintenance and service
measures must be carried out by trained and qualified specialists. See
instructions under the heading Maintenance. Always use genuine accessories.
Always use common sense
It is not possible to cover every conceivable situation you can face. Always exercise care and use your common sense. If you get into a situation where you feel unsafe, stop and seek expert advice. Contact your dealer, service agent or an experienced user. Do not attempt any task that you feel unsure of!
Work safety
Work area safety
• Do not use the machine in bad weather, such as dense fog, heavy rain, strong wind, intense cold, etc.
• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• The machine should not be used in areas where potential for fire or explosions exist.
Electrical safety
WARNING! There is always a risk of shocks from electrically powered
machines. Avoid unfavorable weather conditions and body contact with
lightning conductors and metal objects.
Always follow the instructions in the Operator’s manual to avoid damage.
Never connect the machine to a outlet if plug or cord is damaged.
• Check that the mains voltage corresponds with that stated on the rating plate on the machine.
• Inspection and/or maintenance should be carried out with the motor switched off and the plug disconnected.
• Always shut down the machine before disconnecting the power plug.
• Always unplug the machine during longer work breaks.
• Never drag the machine by means of the cord and never pull out the plug by pulling the cord. Hold the plug to disconnect the power cord.
• Never use the machine if any cable or plug is damaged, but hand it in to an authorized service workshop for repair.
• The machine must never be driven to such a depth in water that it reaches up to the machine’s equipment.
The equipment can be damaged and the machine can be live, resulting in personal injuries.
Grounding instructions
WARNING! Improper connection can result in the risk of electric shock.
Contact a qualified electrician if in doubt as to whether the appliance is properly grounded.
Do not modify the plug. If it will not fit the outlet have a proper outlet installed by a qualified electrician. Make sure local regulations and ordinances are followed.
If the grounding instructions are not fully understood contact a qualified
electrician.
• The machine is equipped with a grounded cord and plug and should always be connected to a grounded outlet. This reduces the risk of electric shock in the
event of malfunction.
• The use of adaptors is not allowed with the machine.
Extension cords and cables
• The marking on the extension cable must be the same or higher than the value stated on the machine’s rating plate.
• Use grounded extension cables.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of
electric shock.
• Keep the connection to the extension cord dry and off the ground.
• Keep cable away from heat, oil, charp edges or moving parts. Damaged or entangled cable increase the risk of electric shock.
• Check that the cables are intact and in good condition.
Never use the machine if any cable or plug is damaged, but hand it in to an authorized service workshop for repair.
• To avoid overheating do not use the extension cord while it is rolled up.
• Ensure the cord is behind you when you start to use the machine so that the cord will not be damaged.
Personal safety
• Wear personal protective equipment. See instructions under the heading ”Personal protective equipment”.
• Never use the machine if you are tired, if you have drunk alcohol, or if you are taking medication that could affect your vision, your judgement or your coordination.
• Never allow anyone else to use the machine without first ensuring that they have read and understood the contents of the operator’s manual.
• All operators shall be trained in the use of the machine. The owner is responsible for ensuring that the operators receive training.
• People and animals can distract you causing you to lose control of the machine. For this reason, always remain concentrated and focused on the task. Never
allow children to use or be in the vicinity of the machine.
• Be careful as clothing, long hair, and jewelry can get caught in moving parts.
• There is always a risk of crush injuries when working with products containing moving parts. Keep your distance!
• Make sure that there is always another person close at hand when you use the machines, so that you can call for help if an accident should occur.
• Never leave the machine unsupervised with the motor running. Always unplug the machine during longer work breaks.
• Prevent unintentional starting. Ensure the switch is in the OFF-position.
• Check that no tools or other objects have been left lying on the machine.
• Always ensure you have a safe and stable working position.
Use and care
• Husqvarna concrete dust vacuum cleaner DC 6000 is designed for wet or dry suctioning of concrete dust and liquid slurry management.
• The machine is intended for use in industrial applications by experienced operators.
• Inspection and/or maintenance should be carried out with the motor switched off and the plug disconnected.
• Keep all parts in good working order and ensure that all fixtures are properly tightened.
• The machine should not be started without the dust collection bag attached.
Transport and storage
• It is highly recommended that a dust collection bag be fitted to the machine at all times whether in use or transportation.
• At no time should lifting of machinery be attempted without mechanical means such as a hoist or fork lift.
• The machine should not be lifted by handles, motor, chassis or other parts. Transportation of the machine is best done on a pallet / skid to which the machine
must be firmly secured. Always use the machine mounted lifting eye when lifting. Machine dimensions are 1892 mm raised and 1612 mm lowered.
• Secure the equipment during transportation in order to avoid transport damage and accidents.
• The machine should be transported under cover where possible, limiting the exposed to natural elements – in particular rain and snow.
IMPORTANT! It is recommended that machinery be transported upright where possible.
• Store the equipment in a lockable area so that it is out of reach of children and unauthorized persons.
• Store the machine and its equipment in a dry and frost proof place. |