Husqvarna PG 280 Floor Concrete Grinder/Polisher 967648706, 11", 240V, 1 PH Electric Motor
Safety Information
Husqvarna PG 280 Floor Grinder/Polisher 240V
General safety precautions
! WARNING! This section describes basic safety directions for using the machine.
This information is never a substitute for professional skills and experience. If you get into a situation where you feel unsafe, stop and seek expert advice.
Contact your dealer, service agent or an experienced user. Do not attempt any
task that you feel unsure of!
• Do not use the machine without first reading and understanding the contents of this Operator’s Manual.
Save all warnings and instructions for future reference.
Work area safety
• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• The machine should not be used in areas where potential for fire or explosions exist.
Electrical safety
WARNING! There is always a risk of shocks from electrically powered
machines. Avoid unfavorable weather conditions and body contact with
lightning conductors and metal objects. Always follow the instructions in the
Operator’s manual to avoid damage. Never connect the machine to a outlet if
plug or cord is damaged.
• Check that the mains voltage corresponds with that stated on the rating plate on the machine.
• Inspection and/or maintenance should be carried out with the motor switched off and the plug disconnected.
• Always shut down the machine before disconnecting the power plug.
• Never drag the machine by means of the cord and never pull out the plug by pulling the cord. Hold the plug to disconnect the power cord.
• Never use the machine if any cable or plug is damaged, but hand it in to an authorized service workshop for repair.
• The machine must never be driven to such a depth in water that it reaches up to the machine’s equipment.
The equipment can be damaged and the machine can be live, resulting in personal injuries.
• Always have the power cable disconnected when connecting and disconnecting the contact between the motor and the electrical box.
Grounding instructions
WARNING! Improper connection can result in the risk of electric shock.
Contact a qualified electrician if in doubt as to whether the appliance is properly grounded.
Do not modify the plug. If it will not fit the outlet have a proper outlet installed by a qualified electrician. Make sure local regulations and ordinances are followed.
If the grounding instructions are not fully understood contact a qualified
electrician.
• The machine is equipped with a grounded cord and plug and should always be connected to a grounded outlet. This reduces the risk of electric shock in the
event of malfunction.
• The use of adaptors is not allowed with the machine.
Extension cords and cables
• The marking on the extension cable must be the same or higher than the value stated on the machine’s rating plate.
• Use grounded extension cables.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of
electric shock. A cord marked with the letter ”W” is suitable for outdoor use.
• Keep the connection to the extension cord dry and off the ground.
• Keep cable away from heat, oil, sharp edges or moving parts. Damaged or entangled cable increase the risk of electric shock.
• Check that the cables are intact and in good condition. Never use the machine if any cable is damaged, but hand it in to an authorized service workshop for repair.
• To avoid overheating do not use the extension cord while it is rolled up.
• Ensure the cord is behind you when you start to use the machine so that the cord will not be damaged.
• When using an extension cable, use only certified extension cables with sufficient reach.
Personal safety
WARNING! Overexposure to vibration can lead to circulatory damage or nerve
damage in people who have impaired circulation. Contact your doctor if you
experience symptoms of overexposure to vibration. Such symptoms include
numbness, loss of feeling, tingling, pricking, pain, loss of strength, changes
in skin color or condition. These symptoms normally appear in the
fingers, hands or wrists. These symptoms may be increased in cold
temperatures.
• Wear personal protective equipment. See instructions under the heading ”Personal protective equipment”.
• Never use the machine if you are tired, if you have drunk alcohol, or if you are taking medication that could affect your vision, your judgement or your coordination.
• Never allow anyone else to use the machine without first ensuring that they have read and understood the contents of the operator’s manual.
• All operators shall be trained in the use of the machine. The owner is responsible for ensuring that the operators receive training.
• People and animals can distract you causing you to lose control of the machine. For this reason, always remain concentrated and focused on the task. Never allow children to use or be in the vicinity of the
machine.
• Be careful as clothing, long hair, and jewelry can get caught in moving parts.
• There is always a risk of crush injuries when working with products containing moving parts. Keep your distance!
• Never leave the machine unsupervised with the motor running.
• Make sure that there is always another person close at hand when you use the machines, so that you can call for help if an accident should occur.
• Always ensure you have a safe and stable working
position.
Personal protective equipment
WARNING! You must use approved personal protective equipment whenever
you use the machine. Personal protective equipment cannot eliminate the risk of
injury but it will reduce the degree of injury if an accident does happen. Ask
your dealer for help in choosing the right equipment.
• Hearing protection
• Protective goggles or a visor
• Breathing mask
• Heavy-duty, firm grip gloves.
• Tight-fitting, heavy-duty and comfortable clothing that permits full freedom of movement.
• Boots with steel toe-caps and non-slip sole
• Always have a first aid kit nearby
Use and care
• Only use the machine for the purpose it was intended for.
• Keep all parts in good working order and ensure that all fixtures are properly tightened.
• Never use a machine that is faulty. Carry out the safety checks, maintenance and service instructions described in this manual. Some maintenance and
service measures must be carried out by trained and qualified specialists. See instructions under the heading Maintenance.
• Do not modify safety equipment. Check regularly that they function as they should. The machine must not be run with defective or disassembled safety
equipment.
• Never use a machine that has been modified in any way from its original specification.
• Always use genuine accessories. Contact your dealer for more information.
• Machinery should only be started when grinding heads are resting on the ground unless carrying out a testing procedure as outlined in this manual.
• The machine should not be started without the brush list attached. It is essential a good seal between machine and floor be established for safety, especially when operating in dry grinding applications.
• During grinding, the machine must be connected to a vacuum cleaner for the removal of the dust.
• Make sure the machine is without power when changing diamond tools by pressing in the emergency stop and disconnecting from the power outlet.
• Always dismantle the diamond tool after each grinding operation.
• Make sure that the brush list is intact and clean and that it seals tightly against the floor. Damaged brush list should always be replaced.
• The tool plate continues to rotate for a while after the motor has been switched off. Maintain grinding action until the fan has come to a complete stop. Ensure the tool plate has stopped rotating before lifting up the
machine.
• When grinding adhesive, asphalt, paint or the like, lift the front of the machine slightly after use to prevent it sticking to the floor from the heat. Ensure the tool plate has stopped rotating before lifting up the
machine.
• Diamond tools may be very hot after use. Leave machine to cool off before removing the diamond segments. Use protective gloves.
• Always use the machine mounted lifting eye when lifting.
• Always carry the machine by the carrying handle and the handle. |