Dozer-100-120hp Rental

ENGINE UNITS: US METRIC Engine Model Cat C4.4 ACERT™ Power - Net 104.0 hp Displacement 269.0 in3 ISO 9249 104.0 hp EEC 80/1269 104.0 hp SAE J1349 104.0 hp Bore 4.13 in Stroke 5.0 in TRANSMISSION Drive Pumps 2 Track motors 2 Relief valve settings 6918.0 psi Maximum travel speed - forward 5.6 mph Maximum travel speed - reverse 6.2 mph WEIGHTS Operating Weight - XL 20534.0 lb Operating Weight - LGP 21266.0 lb SERVICE REFILL CAPACITIES Fuel tank 51.5 gal Crankcase and filter 2.91 gal Final drives, XL (each side) 2.6 gal Final drives, LGP (each side) 2.6 gal Cooling system 5.92 gal Transmission/hydraulic tank 15.7 gal HYDRAULIC CONTROLS Pump Output 19.4 gal/min Relief valve setting 2988.0 psi UNDERCARRIAGE Shoe width - XL 20.0 in Shoe width - LGP 26.0 in Length of track on ground - XL 91.0 in Length of track on ground - LGP 91.0 in Track gauge - XL 63.0 in Track gauge - LGP 69.0 in Ground contact area - XL 3652.0 in2 Ground contact area - LGP 4726.0 in2 Ground pressure - XL 5.6 psi Ground pressure - LGP 4.5 psi Ground contact area - LGP with 770 mm (30 in) shoes 5514.0 in2 Ground pressure - LGP with 770 mm (30 in) shoes 3.93 psi Shoe width - LGP Option 2 30.0 in Track gauge - LGP with 770 mm (30 in) shoes 73.2 in RIPPER Type Parallelogram Number of Shanks 3 Maximum digging depth 13.3 in Maximum reach at ground line 21.9 in Maximum ground clearance under tip 17.6 in Overall width 67.3 in Height 6.5 in Weight 1222.0 lb WINCH Weight 1345.0 lb Winch Drive Hydrostatic Control Hydraulic Speed Variable Winch length 27.76 in Overall width 29.2 in Drum diameter 10.0 in Drum width 10.8 in Throat clearance 6.75 in Rope diameter - recommended 0.63 in Rope diameter - optional 0.75 in Drum capacity - recommended cable 371.0 ft Drum capacity - optional cable 256.0 ft Maximum line pull - bare drum 40000.0 lb Maximum line pull - full drum 25000.0 lb Maximum line speed - bare drum 131.0 ft/min Maximum line speed - full drum 207.0 ft/min STANDARDS ROPS SAE J397-OCT95, SAE J1040-MAY94, ISO 3471-94, ISO 3164-95 FOPS SAE J231-JAN81, ISO 3449-92 BLADE Blade width - Intermediate 115.0 in Blade width - XL 109.5 in Blade width - LGP 126.7 in Blade height - Intermediate 39.8 in Blade height - XL 42.2 in Blade height - LGP 39.8 in Blade capacity - Intermediate 2.73 yd3 Blade capacity - XL 2.86 yd3 Blade capacity - LGP 3.06 yd3 Digging depth - Intermediate 22.5 in Digging depth - XL 23.1 in Digging depth - LGP 22.5 in