You are here: Home > New Equipment > Concrete & Masonry > Mixers Mortar & Concrete > Browse All Concrete Mixers

IMER Workman II 350 1105856 Towable Mixer 12CF - Without motor Overview Description Specs Safety Brochures/Manuals Safety Information Imer Workman II 350 Towable Multi Barrel Mixer 12 CF Steel Drum 1. Always place the mixer on a flat surface before beginning to mix. If using an electric unit make sure the proper grounded extension cord (10 gauge-50ft max) is being used and is away from any water. 2. Make sure you have thoroughly read the manufacturer's mixing instructions located on the bag of whatever material you are mixing (concrete, mortar, stucco, dry pack, pea-gravel grout). Make sure you follow the mixing proportions for adding water on the mixing instructions. 3. Start the mixer and if a gas unit run up to 3/4 throttle. You are now ready to start adding material and water. Below is a simple chart which reviews the capacities of each mixer. Mixer Maximum batch output capacity in premixed bags Maximum batch output capacity in Cubic Feet Minuteman 3.5 - 80lb bags (280lbs) 3.5CF Wheelman 3.5 - 60lb bags (210lbs) 3 CF Workman 250 6 - 80lb bags (480lbs) 6 CF Workman 350 10 - 80lb bags (800lbs) 9CF 4. DON'T BE MACHO.....SAVE YOUR BACK! Add 1/2 the water for your batch size first. Now when filling the rotating Multi Mixer, cut open the bags and dump them first into 5 gallon plastic pails, then dump the material from the pails into the mixer. This technique is safer, cleaner, and much easier than trying to dump straight from the bags. If you are not using premixed bags of material make sure you always the sand first then the lime and cement. This gives a better mixing action and prevents the lighter materials from coating the sides. Be careful not to add too much water. It is best to mix a bit on the dry side then add the last amount of water carefully to get the perfect mix. 5. The average complete mixing time for most materials should be under 5 minutes, but always follow the material manufacturers recommended mixing times. 6. Never allow material to harden up inside the drum. When the mixer has been discharged it is always best to do a quick wash of the inside of the drum and let the mixer just turn the water. If mixing another load just add material. If you are finished rinse out the mixer and dump the water out. 6. The WHEELMAN is made to move while it is full of material but be sure if it is full not to tip it over to far or material will be spilled from the drum opening. 7. The MINUTEMAN is designed to be used with a wheel barrow. The wheels on it are to move it around EMPTY. NEVER MOVE THE MINUTEMAN WITH MATERIAL IN IT.

---

We know your business success depends on reliable quality equipment and parts to continue being a leader in your industry. When you want Genuine IMER original equipment parts, accessories and equipment you can always depend on Discount-Equipment.com to come through with the genuine o.e.m. products you need as quickly and inexpensive as possible. Our sales staff combined experience consists of over 90 years in the construction parts and equipment industry. We have over 1 million items online, if you are having trouble finding your item, we also have the resources to help you find what you need, our industry leading web site includes thousands of parts and service manuals available to look up your items. If you don't find what you are looking for please fill out our parts request form here.