Multiquip TP24X Tile Saw, 10" w/ 2HP, 115V, 24, 60HZ Electric Motor, Premium

Safety Information

Multiquip TP24X Tile Saw 10"

GENERAL SAFETY

WARNING

Adherence to the OSHA 2017 Ruling governing Occupational Exposure to Respirable Crystalline Silica, requires that all sawing operations MUST BE conducted with an integrated water delivery system that feeds water to the blade.

CAUTION

NEVER operate this equipment without proper protective clothing, shatterproof glasses, respiratory protection, hearing protection, steel-toed boots and other protective devices required by the job or city and state regulations.

Avoid wearing jewelry or loose fitting clothes that may snag on the controls or moving parts as this can cause
serious injury.

NEVER operate this equipment when not feeling well due to fatigue, illness or when under medication.

NEVER operate this equipment under the influence of drugs or alcohol.

ALWAYS clear the work area of any debris, tools, etc. that would constitute a hazard while the equipment is in operation.

No one other than the operator is to be in the working area when the equipment is in operation.

ALWAYS check the equipment for loosened threads or bolts before starting.

DO NOT use the equipment for any purpose other than its intended purposes or applications.

NOTICE

This equipment should only be operated by trained and qualified personnel 18 years of age and older.

Whenever necessary, replace nameplate, operation and safety decals when they become difficult read.

Manufacturer does not assume responsibility for any accident due to equipment modifications. Unauthorized equipment modification will void all warranties.

NEVER use accessories or attachments that are not recommended by Multiquip for this equipment. Damage to the equipment and/or injury to user may result.

ALWAYS know the location of the nearest fire extinguisher.

ALWAYS know the location of the nearest first aid kit.

ALWAYS know the location of the nearest phone or keep a phone on the job site. Also, know the phone numbers of the nearest ambulance, doctor and fire department.
This information will be invaluable in the case of an emergency.

SAW SAFETY

DANGER

NEVER operate the equipment in an explosive atmosphere or near combustible materials. An explosion or fi re could result causing severe bodily harm or even death.

WARNING

Accidental starting can cause severe injury or death. ALWAYS place the ON/OFF
switch in the OFF position.

Keep hands away from moving parts at all times.

NEVER disconnect any emergency or safety devices. These devices are intended for operator safety. Disconnection of these devices can cause severe injury, bodily harm or even death. Disconnection of any of these devices will void
all warranties.

CAUTION

ALWAYS ensure saw is securely placed on appropriate blocks or jackstands when maintenance requires elevation of the saw.

If the machine malfunctions, stop the saw immediately and secure it. Fix the problem as soon as possible.

NOTICE

ALWAYS keep the machine in proper running condition.

Fix damage to machine and replace any broken parts immediately.

Make sure there is no buildup of grease, oil or debris on the machine.

ALWAYS store equipment properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children and unauthorized personnel.

BLADE SAFETY

WARNING

Rotating blade can cut and crush. ALWAYS keep hands and feet clear while operating the saw.

CAUTION

NEVER operate the saw without blade guards and covers in place. Exposure of
the diamond blade must not exceed 180 degrees.

Verify the motor start switch is set to the OFF position before installing a blade.

ALWAYS inspect blade before each use. The blade should exhibit no cracks,
dings, or flaws in the steel centered core and/or rim. Center (arbor) hole must be undamaged and true.

NOTICE

Use proper blades and follow blade manufacturer’s recommendations. Match the blade RPM (blade shaft RPM) to the recommended blade surface feet per minute
(SFPM).

Ensure the blade-mounting bolt is tightened adequately

ALWAYS examine blade flanges for damage and excessive wear.

Ensure the blade is marked with an operating speed greater than the spindle speed of the saw.

Only cut the material that is specified for the diamond blade. Read the specification of the diamond blade to ensure the proper tool has been matched to the material being cut.

Ensure that water is used during sawing operations and that a sufficient flow of water is applied to both sides of the blade.

DO NOT drop the diamond blade on ground or surface.

Ensure that the blade is mounted for proper operating direction.

Adhere to the blade manufacturer’s recommendations on handling, storage and safe usage of blades.

ELECTRIC MOTOR SAFETY

NOTICE

Operate electric motor only at the specified voltage indicated on the nameplate.

DO NOT spray water onto electric motor.

ALWAYS disconnect AC power plug from power source before moving saw, changing blade, or performing maintenance.

ALWAYS make sure the ON/OFF switch on the electric motor is in the OFF position
when not in use and before inserting the saw’s power plug into an AC receptacle.

Power Cord/Cable Safety

DANGER

NEVER let power cords or cables lay in water.

NEVER use damaged or worn cables or cords when connecting equipment to generator. Inspect for cuts in the insulation.

NEVER grab or touch a live power cord or cable with wet hands. The possibility exists of electrical shock, electrocution or death.

Make sure power cables are securely connected. Incorrect connections may
cause electrical shock and damage to the saw.

CAUTION

Ensure that cables and cords will not be tripped over or trapped underneath the saw.

Never use the cable to pull out the plug from the power source.

NOTICE

ALWAYS make certain that proper power or extension cord has been selected for the job.

Protect the cable from heat, oil, and sharp edges.

LIFTING SAFETY

CAUTION

NEVER allow any person or animal to stand underneath the equipment while lifting.

Some saws are very heavy and awkward to move around.
Use proper heavy lifting procedures.

DO NOT lift machine to unnecessary heights.

NEVER lift the equipment while the motor is running.

TRANSPORTING SAFETY

NOTICE

ALWAYS shutdown motor before transporting.

ALWAYS tie down equipment during transport by securing the equipment with rope.

Ensure that the diamond blade does not come into contact with the ground or surface during transportation.

NEVER transport the saw to or from the job site with the blade mounted.

ENVIRONMENTAL SAFETY

NOTICE

Dispose of hazardous waste properly. Examples of potentially hazardous waste
are used motor oil, fuel and fuel filters.

DO NOT use food or plastic containers to dispose of hazardous waste.

DO NOT pour waste, oil or fuel directly onto the ground, down a drain or into any water source