Grinder Carbide Inserts Rental Set of 2 Assy. (Edco Strip-Serts) C5CD

Edco Strip-Serts

These tungsten carbide inserts are designed to remove heavy build up without damaging the concrete. The Strip-Sert has four beveled edges and is easily replaced when worn.

Each side is rated to last 2 to 4 hours (or 500 to 1000 sq. ft.) Strip Serts are ideal for removing heavy mastics, paints, resins, tar, fiberglass, ice, industrial buildups and rubber deposits.

Note: Strip-Serts will only strip the coatings and will not damage the concrete floor. Keeping this in mind, please remember that some times coatings will sink into the top layer surface of the concrete. Do not use the Strip-Serts for that application. Use the Dyma-Serts if a clean concrete finish is desired.

Tip: If the material to be removed can be cut with a knife, use the Strip-Serts especially if the material is thicker than 1/16".

Warning: Do not use the Strip-Serts on Elastomeric or Waterproof Membranes.

Caution: Adding weights to the grinder with Strip-Serts may not be suitable for removing thick buildup of materials. The extra weight may cause the machine to aggressively grind the material and cause it to jump around and kick out the Strip-Serts. In that situation, remove the weights.

Caution: Strip-Serts are designed to strip away coatings not to grind concrete. Grinding concrete with Strip Serts will dull the sharp edges quickly causing the grinding action to stop.