Grader/Maintainer, 10' Diesel (PSI M413XT) (GR10)
Specs (Specifications may change due to continuous product development)
M413XT Dimensions | | Overall Length (Std. Equip) | 20' 4" | Overall Length (with Scarifier) | 21' | Width Over Tires | 6' 10" | Transport Width (10 ft. blade) | 8' 1" | Overall Height | 8' 10.5" | Wheel Base | 10' 6" | Blade Base | 5' 9" | Scarifier Width | 6' 2" | Model M413XT Specifications | Weights | Operating | 13,200 | Front Axle | 5,700 | Rear Axle | 7,520 | Engine (Tier II Compliant) | Deutz 2012, 4 cylinder diesel, turbo-charged and after-cooled, 133 hp, 363.3 lbs. ft torque, 0-8 mph low range, 0-17 mph high. | Backfill Blade | Length x Height | N/A | Lift Above Ground | N/A | Penetration | N/A | Loader Assembly (std. quick-attach) | Bucket Capacity | .75 yd³ | Width | 85" | Dump Height | 120" | Optional Scarifier (std. quick-attach) | Width | 84" | Shanks | 7 | Penetration | 8" | Lift | 24" | Electrical System | 12-volt keyed ignition, 78 amp alternator, heavy duty battery, neutral switch on starting circuit. | Tires & Wheels | Tires | 15-19.5 NHS 8 ply | Wheels | 9 lug 19.5 x 15 | Front Axle Oscillation | 30 degrees | Drive System | All wheel limited slip hydrostatic transmission drive, power steering, instant forward & reverse, foot actuated speed/directional
control with spring return to neutral position safety feature, planetary reduction type drive | Hydraulic System | 20 U.S. gallon-capacity, hydraulic oil reservoir, high-low sight level gauge on hydraulic reservoir, charge pressure
filtration for hydrostatic circuit, minimum 100 micron mesh suction screen in tank. Minimum 10 micron high pressure filter for accessory pumps, three line auxiliary hydraulics at 25 GPM (max.)
at 2000 psi with quick couplers front & rear. | Fuel System | Capacity | 40 U.S. gallons | Moldboard | Length x Height | 10' x 19" | Ground Clearance | 11" | Hydraulic Side Shift | 36" outside tires L or R | Hydraulic Tilt | Infinitely variable from 0° to 45° | Hydraulic Angle | 39° L or R | Float Position | Standard | Turning Radius | Inside wheels | 8' | Inside moldboard | 5' | Frame | Unitized box tube and heavy gauge welded steel. | Standard Safety Equipment | Electronic back-up alarm, seat belt, SAE ROPS certified, neutral safety switch,
loader boom safety prop, spring applied with hydraulic release parking brake. | |
