MG18 Dimensions |
|
Overall Length (Std. Equip) | 23' |
Width Over Tires | 7' 5" |
Transport Width (10 ft. blade) | 8' 11" |
Transport Width (12 ft. blade) | 9' 4" |
Overall Height | 9' 1" |
Wheel Base | 16' 6" |
Tandem Wheel Base | 3' 8.5" |
Blade Base | 6' 9.5" |
Model MG18 Specifications |
Weights |
Operating | 18,590 |
Front Axle | 5,600 |
Rear Axle | 12,990 |
Engine (Tier II Compliant) |
Deutz 2012, 4 cylinder diesel, turbo-charged and after-cooled, 133 hp, 363.3 lbs. ft torque, 0-8 mph low range, 0-17 mph high. |
Moldboard Assembly |
Length | 10' std - 12' optional |
Height | 19" |
Lift Above Ground | 13.75" |
Hydraulic Side Shift | 36" outside wheel L or R |
Hydraulic Tilt | Infinite from 0° - 45° |
Hydraulic Angle | 39° L or R |
Two work modes - PSI's exclusive Fine Grade mode for finish grading applications
& Coarse Grade Mode for production grading applications. |
Scarifier (front-mounted) |
Width | 84" |
Shanks | 7 |
Shank Penetration | 9" |
Ground Clearance | 11.5" |
Down Pressure | 6,100 lbs |
Electrical System |
12-volt keyed ignition, 78 amp alternator, heavy duty battery,
neutral switch on starting circuit. |
Tires & Wheels |
Tires | (6) 15-19.5 NHS 8 ply |
Wheels | (6) 9 lug 19.5 x 15 |
Front Axle Oscillation | 30° |
Rear Bogey Oscillation | 30° |
Drive System |
Tandem drive 4-wheel limited slip hydrostatic transmission with electronic traction control system, power steering, foot-actuated speed/direction control with spring return, planetary reduction type hydrostatic drive. |
Hydraulic System |
20 U.S. gallon-capacity, high-low sight level gauge, 7 micron drive circuit filtration, 10 micron low-presssure circuit filtration. |
Fuel System |
Capacity | 40 U.S. gallons |
Steering |
Turning Radius Inside 10' Blade | 6' 6" |
Turning Radius Inside Wheels | 7' |
Turning Radius Outside Wheels | 18' |
Front Wheel Lean | 20° L or R |
Wheel Steering Angle | 45° L or R |
Center Articulation Angle | 32° L or R |
Frame |
Unitized box tube and heavy gauge welded steel. |
Standard Safety Equipment |
Electronic back-up alarm, seat belt, SAE ROPS certified, neutral safety switch,
parking brake spring applied with hydraulic release parking brake. |