Diamond Products 5800566 Saw, Block Gas 11HP Honda GX390ES Engine W/ Electric Start, CC811MHE-20 c/n 60933
Safety Information
Diamond Products CC800M Block Saw
SAFETY WARNINGS
PERSONAL SAFETY
Read and understand instructions before operating saw.
Do not operate the saw under the influence of drugs or alcohol.
Always wear safety-approved hearing, eye, head and respiratory protection.
Sturdy boots with non-slip soles aid in providing proper footing. Use of steel-toed safety boots is recommended.
Under certain conditions, sparks may fly, so never wear clothes of flammable material.
Know how to stop saw quickly in case of emergency.
Keep all parts of your body away from the blade at all times.
Wear work gloves to avoid contact with concrete slurry, which can cause serious skin irritation.
BLADE SAFETY
Examine cutting blades before each use. Blade should have no cracks, nicks or flaws. Center hole should be undamaged. Use only the blades recommended for your model.
This saw should cut only material that is specified on each cutting b lades.
Read the instructions which are on each blade to determine which material the blade is designed to cut.
Inspect blade flanges for damage, excessive wear and cleanliness before mounting blade. Blade should fit snugly on clean, undamaged shaft
Use only blades marked with a maximum operating speed greater than the blade shaft speed.
GENERAL SAW SAFETY
Never leave saw unattended when running.
Keep guards in place and in good condition when saw is in operation.
Use caution and follow instructions when transporting, lifting, and setting up saw. Always tie down the machine when transporting.
Do not use saw or blade if damaged. Do not use a blade that has been dropped.
Never operate gas engine in enclosed areas without proper ventilation.
Establish a training program for all operators of this machine and blade.
CUTTING/WORK AREA SAFETY
Never operate the saw in any application or job where you are not trained or supervised.
Never operate gas engine in enclosed areas without proper ventilation.
Keep bystanders and or animals out of the work area.
Before refueling saws with gas engines, shut off engine and allow it to cool. Do not smoke while handling fuel.
Make sure that the gas cap on the saw and fuel can are tight before starting the saw.
Do not operate the saw in areas of combustible material or fumes. Sparks may occur from the blade that could cause a fire or explosion.
Know the material and work area you are sawing. Hazardous conditions such as live electrical, water or gas lines can be concealed in the material.
Failure to comply with preceding warnings could result in serious bodily injury!
WARNING:
The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
| 
