Morrison 0MS40H05 Hopper Assy W Engine Bartell

MS40C HOPPER ASSY W ENGINE 0MS40H05 The Morrison Spreader is ideal for all types of after-pour applications, such as hardeners, colorings, light reflective coatings, etc. This model works with powder-based materials and trap rock with aggregate up to 3/8″ (9.5 mm) in size. Superior material control is achieved with our independently controlled flow rate and hopper travel speed. The spreader is easily assembled and can be configured to suit your needs. Powered by a Honda Available in 2.5′, 5′ and 10′ (0.7, 1.5, 3 m) sections. Material flow is adjustable from 2 ounces to 3 pounds (0.05 to 1.4 kg) per square foot. Bridge section weighs only 7 lbs (3.2 kg)per foot. Hydraulically agitated hopper weighs 308 lbs (140 kg). Flow rate control is independent from hopper travel speed. Hopper height is adjustable from 2″ (5.0 cm) to 18″ (45.7 cm) over slab. Bolted construction makes on-site length changes and adjustments quick and easy using everyday tools. Metered flow valve assures precise application of expensive toppings. The MS40 is capable of spanning slabs from 10′ (3 m) to 75′ (23 m). Specification Engine Honda GX200 Power Power 5.5 HP Capacity 4.5 cubic ft. (127 L) Maximum Load 600 lbs (272 kg) Discharge Height Adjustable from 2’ (5.0 cm) to 18’ (121.9 cm) Discharge Width 47” (122 cm) Weight Hopper 385 lbs (175 kg) 2.5’ (0.7 m) section 17.5 lbs (8 kg) 5’ (1.5 m) section 32 lbs (14.5 kg) 10’ (3 m) section 61 lbs (28 kg) Wheel Assembly 270 lbs (123 kg) Spin up to 75’ (23 m)