Click

Skid Steer, 1650 lbs. (Mustang 2054 6532)



Safety Information

Note: The following skid steer safety & operating information is intended as a basic guide only. Operators should thoroughly acquaint themselves with the "Owner/Operator's Manual" specific to the make and model they have rented. OSHA requires that an "Owner/Operator's Manual" be present in the cab of a rented skid steer. If the complete manual is not present in your rented skid steer, call your rental dealer immediately. BE SAFE! BE AWARE!


What should I check before starting the engine?

Check the following before starting the engine:

  • Fuel and oil,
  • Hydraulic fluid,
  • Cooling system fluid,
  • Operator cab, seat belt and seat bar,
  • Lift arm and cylinder pivot points, and tires.
  • Follow the manufacturer's recommendations about how often to lubricate all the "lube" points.


What should I do when using a loader?
  • Read, understand, and follow instructions in the manufacturer's operating manual and safety decals on the loader.
  • Know how to operate the equipment safely and be familiar with the location and function of all the controls.
  • Know how to load, tie-down, transport, and unload the loader safely.
  • Wear hearing and head protection.
  • Use the safety treads and grab handles to get on and off the loader.
  • Use seat bar and fasten seat belt.

  • Keep your feet on the pedals when operating the loader.
  • Use only approved attachments and buckets.
  • Keep other people away from work area.
  • Drive with caution and check behind you before backing up.
  • Carry bucket or attachments as low as possible.
  • Load, unload, and turn on level ground.
  • Go straight up and down slopes with the heavy end of the loader pointed uphill.
  • Turn off the engine before attempting any repairs or adjustments.
  • If the equipment is going to be left unattended for sometime, remove the ignition key.
  • Set the parking brakes on before getting off the seat.
  • Lower the bucket before dismounting from the loader.

    What should I avoid when operating a loader?
    • Do not use loader without an approved roll-over protection (ROP) and falling object protection (FOP) cab.
    • Do not exceed rated operating capacity.
    • Do not carry passengers.
    • Do not use the bucket lift people or use as a work platform.
    • Do not make sharp, fast turns or move bucket controls abruptly.
    • Do not travel or turn with lift arms up.
    • Do not leave loader with engine running or with lift arms up.
    • Do not travel across a slope: go straight up or down slopes with the "heavy" end of the loader pointed uphill.
    • Do not approach overhead wires.


    How should I go up and down a slope with a full bucket?

    Keep the heavy end up!



    How should I go up and down a slope with an empty bucket?

    Keep the heavy end up!



    What kind of loaders does this information apply to?

    This information applies to smaller, front-end loaders called skid steer loaders. "Smaller" is a relative term; compact is another name for smaller loaders. Different manufacturers may rate their loaders up to 40 - 80 horsepower (or about 30 - 40 kW) as compact loaders. Some manufacturers use the term "compact loader" to mean what is usually called a skid steer loader or skidsteer loader used in landscaping. More commonly, "compact loader" refers to an articulating wheel loader; i.e., a loader that has two sections connected by a flexible joint and that can be steered by "bending" at the joint. Although many of the main safety principles for skid steer loaders apply to articulating wheel loaders, there are additional safety practices that relate to the operation and maintenance of articulated vehicles that are not covered in this document.

  • We know your business success depends on reliable quality equipment and parts to continue being a leader in your industry. When you want Genuine Mustang original equipment parts, accessories and equipment you can always depend on Discount-Equipment.com to come through with the genuine o.e.m. products you need as quickly and inexpensive as possible. Our sales staff combined experience consists of over 90 years in the construction parts and equipment industry. We have over 1 million items online, if you are having trouble finding your item, we also have the resources to help you find what you need, our industry leading web site includes thousands of parts and service manuals available to look up your items. If you don't find what you are looking for please fill out our parts request form here.


     Mustang Manufacturing Company, Inc. MTL325 Track Loader Printer_Friendly_Specifications_(pdf_184K)
     Mustang Manufacturing Company, Inc. MTL325 Track Loader Printer_Friendly_Specifications_(pdf_184K)
     Mustang Manufacturing Company, Inc. MTL20 Track Loader Printer_Friendly_Specification_(pdf_206K)
     Mustang Manufacturing Company, Inc. MTL20 Track Loader Printer_Friendly_Specification_(pdf_206K)
     Mustang Manufacturing Company, Inc. MTL16 Track Loader Printer_Friendly_Specification_(pdf_208K)
     Mustang Manufacturing Company, Inc. MTL16 Track Loader Printer_Friendly_Specification_(pdf_208K)
     Mustang Manufacturing Company, Inc. 944 Telehandler Print_Friendly_Specs_&_Brochure_(pdf_463k)
     Mustang Manufacturing Company, Inc. 844 Telehandler Print_Friendly_Specs_&_Brochure_(pdf_463k)
     Mustang Manufacturing Company, Inc. 842 Telehandler Mustang_842_Specifications
     Mustang Manufacturing Company, Inc. 842 Telehandler Mustang_842_Specifications
     Mustang Manufacturing Company, Inc. 742 Telehandler Print_Friendly_Specs_&_Brochure_(pdf_533k)
     Mustang Manufacturing Company, Inc. 642 Telehandler Print_Friendly_Specs_&_Brochure_(pdf_463k)
     Mustang Manufacturing Company, Inc. 634 Telehandler Print_Friendly_Specs_&_Brochure_(pdf_463k)
     Mustang Manufacturing Company, Inc. 634 Telehandler Print_Friendly_Specs_&_Brochure_(pdf_463k)
     Mustang Manufacturing Company, Inc. 519 Telehandler Mustang_519_Specifications
     Mustang Manufacturing Company, Inc. 519 Telehandler Mustang_519_Specifications
     Mustang Manufacturing Company, Inc. 2109 Skid Steer Printer_Friendly_Specification_(pdf_204K)
     Mustang Manufacturing Company, Inc. 2109 Skid Steer Printer_Friendly_Specification_(pdf_204K)
     Mustang Manufacturing Company, Inc. 2100RT Brochure & Specs
     Mustang Manufacturing Company, Inc. 2100RT Brochure & Specs
     Mustang Manufacturing Company, Inc. 2099 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2099 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2086 Skid Steer Printer_Friendly_Specifications_(pdf_157K)
     Mustang Manufacturing Company, Inc. 2086 Skid Steer Printer_Friendly_Specifications_(pdf_157K)
     Mustang Manufacturing Company, Inc. 2076 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2076 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2066 Skid Steer Printer_Friendly_Specifications_(pdf_(186K)
     Mustang Manufacturing Company, Inc. 2066 Skid Steer Printer_Friendly_Specifications_(pdf_(186K)
     Mustang Manufacturing Company, Inc. 2054 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2054 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2044 Skid Steer Printer_Friendly_Specifications_(pdf_187K)
     Mustang Manufacturing Company, Inc. 2044 Skid Steer Printer_Friendly_Specifications_(pdf_187K)
     Mustang Manufacturing Company, Inc. 2041 Skid Steer Mustang 2026 & 2041 Skid Steer Product Brochure
     Mustang Manufacturing Company, Inc. 2041 Skid Steer Mustang 2026 & 2041 Skid Steer Product Brochure
     Mustang Manufacturing Company, Inc. 2041 Skid Steer Mustang 2026 & 2041 Skid Steer Product Brochure
     Mustang Manufacturing Company, Inc. 2032 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2032 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2026 Skid Steer Mustang_2026_Safety_&_Operation_Manual
     Mustang Manufacturing Company, Inc. 2026 Skid Steer Mustang_2026_Safety_&_Operation_Manual
     Mustang Manufacturing Company, Inc. 2022 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2022 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 1750RT Brochure and Specs 1750RT & 2100RT
     Mustang Manufacturing Company, Inc. 1750RT Brochure and Specs 1750RT & 2100RT
     Mustang Manufacturing Company, Inc. 1155 Telehandler Mustang_1155_Product_Specfications
     Mustang Manufacturing Company, Inc. 1155 Telehandler Mustang_1155_Product_Specfications



    Power Trowels

    Picture of Walk Behind Power trowel

    Shopping Cart

    Quote Queue

    Leica (807479) A170 - Solar Panel with Case

    Terex 236768 AL5000 Maintenance Kit *PART OBSOLETE - NO LONGER AVAILABLE*

    Power Blanket MD1020G Multi-Duty, Heavy-Duty Gray Alloy Concrete Curing Blanket, 10' X 20'

    03407 44053 Seal Rubber Airman PDS185S-6C2 Air Compressor

    38441 26710 Plate Airman PDSF330DP and PDS400S-6E1 Air Compressor

    03402 15025 O-Ring Airman PDSF330DP and PDS400S-6E1 Air Compressor

    T110697GT HARNESS 12-PIN CONNECTOR Terex AL4 Light Tower

    853309GT DECAL 240V 30 AMP RECEPTACLE Terex AL4 Light Tower

    Power Blanket MD0409NHG Multi-Duty, Heavy Duty Gray Alloy Concrete Curing Blanket, 4' X 9'

    TK CM4-GH5.5 4 Cu. Ft. Concrete Mixer With 5.5HP Honda GX160 Gas Engine Hwy Towable 12" - NLA

    TK MM12-E7.0 12 Cu. Ft. Mortar Mixer With 7.5HP. 3PH Electric Motor Plus Free Tow Pole

    52350 36030 Cover Airman PDS100S-6E1 Air Compressor

    Bil-Jax 0042-047 Open Frame Safety Guard

    Bil-Jax 0042-221 24" Width Stair Section 6'5"

    TK CM9-DY7E 9 Cu. Ft. Concrete Mixer With 6.4 HP Yanmar Diesel, Electric Start Plus Free Tow Pole

    0000BNA34 Belt A-34 TK Equipment MVP90 Plate Compactor

    03407 64626 Seal Rubber Airman PDSF330DP and PDS400S-6E1 Air Compressor

    541403649 Husqvarna WALL SAW CARRIAGE EQUIPMENT Wall Saws () Genuine OEM Husqvarna

    GX390RT2VKX4-BK Honda 390CC HONDA ENGINE Genuine OEM Honda

    GCV200LAS3C-BK Honda 200CC HONDA ENGINE VERTICAL Genuine OEM Honda

    Bil-Jax 0054-348 Top hinged platform 28"W x 8'L

    GX100RTKRGA-BK Honda 100CC HONDA ENGINE Genuine OEM Honda

    GX270UT2HEA2 Honda 270CC HONDA ENGINE Genuine OEM Honda

    Multiquip WSHA25 (Whiteman) Vibratory Screed Air Powered Screed - Truss Sections 2-1/2' NLA

    Bil-Jax 0042-094 Outside Handrail

    Chicago Pneumatic Generator CPG 70 Towable, 70KVA / 56KW #8972822873

    GCV160LA0SBA Honda 160CC HONDA ENGINE VERTICAL Genuine OEM Honda

    968981315 Husqvarna WS 348 SYSTEM COMPLETE EQUIPMENT Wall Saws () Genuine OEM Husqvarna

    GC160LAVXA Honda 160CC HONDA ENGINE Genuine OEM Honda

    GX270UT2XQCWT-BK Honda 270CC HONDA ENGINE 49 STATE ENGINE Genuine OEM Honda

    GX240UT2XQAR2 Honda 240CC HONDA ENGINE 49 STATE ENGINE Genuine OEM Honda

    994600GT SCREW 1/2-13NC X 1-1/2H Terex RL4000 Light Tower

    GX390UT2XLX2 Honda 390CC HONDA ENGINE 49 STATE ENGINE Genuine OEM Honda

    Predator 836-0800103 T-Mag, 70/80 Grit (Yellow), Double Rectangle, Medium Bond

    GX270UT2XHEA2 Honda 270CC HONDA ENGINE 49 STATE ENGINE Genuine OEM Honda

    GX160UT2RHE2K Honda 160CC HONDA ENGINE Genuine OEM Honda

    54305 Assembly control box w/controller Lofa 750 Generac Magnum MTP6DZV Trash Pump

    GX100RTKRSB Honda 100CC HONDA ENGINE Genuine OEM Honda

    40209016 THROTTLE WIRE TK RAM-70H Rammer

    GX390UT2VZWE Honda 390CC HONDA ENGINE Genuine OEM Honda

    GSV190LAS3T Honda 190CC HONDA ENGINE VERTICAL Genuine OEM Honda

    GC160LAPHA Honda 160CC HONDA ENGINE Genuine OEM Honda

    230563GT RACE Terex AL4 Light Tower

    GX390UT2XQAE2 Honda 390CC HONDA ENGINE 49 STATE ENGINE Genuine OEM Honda

    GX200UT2QC9 Honda 200CC HONDA ENGINE Genuine OEM Honda

    GX390RT2QTT Honda 390CC HONDA ENGINE Genuine OEM Honda

    Predator 836-1500301 T-Mag, 150 Grit (Blue), Double Round, X-Soft Bond

    GX270RT2VMGN Honda 270CC HONDA ENGINE Genuine OEM Honda

    GS190LAXQHAF Honda 190CC HONDA ENGINE 49 STATE ENGINE Genuine OEM Honda

    38860 36800 Bracket Airman PDSF330DP and PDS400S-6E1 Air Compressor

    GX270UT2QXB7 Honda 270CC HONDA ENGINE Genuine OEM Honda

    GX340UT2QDW9 Honda 340CC HONDA ENGINE Genuine OEM Honda

    Chisel Electiric 14.3 lb. 3" (CH28)

    GX240R1VTA2 Honda 240 CC HONDA ENGINE Genuine OEM Honda


    Manufacturer/Brand


    Equipment Type




    Over 32 Years of Serving the Industry