Click

Magnetic Drill Press Rental Position Electromagnetic (Milwaukee Model 2042 #2365) DM34



Safety Information



GENERAL SAFETY RULES FOR OPERATING ELECTRIC POWER TOOLS

WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. PRINT AND SAVE THESE INSTRUCTIONS.


    WORK AREA
  1. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
  2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
  3. Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed.

    ELECTRICAL SAFETY
  4. Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any adaptor plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. If the tools should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user.
  5. Double Insulated tools are equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way. Double insulation eliminates the need for the three wire grounded power cord and grounded power supply system. Before plugging in the tool, be certain the outlet voltage supplied is within the voltage marked on the nameplate. Do not use "AC only" rated tools with a DC power supply.
  6. Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded. If operating the tool in damp locations is unavoidable, a Ground Fault Circuit Interrupter must be used to supply the power to your tool. Electrician's rubber gloves and footwear will further enhance your personal safety.
  7. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
  8. Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock.
  9. When operating a power tool outside, use an outdoor extension cord marked "W-A" or "W". These cords are rated for outdoor use and reduce the risk of electric shock. Refer to Wire Gauge Chart for Extension Cords for more information.

    PERSONAL SAFETY
  10. Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.
  11. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. Keep handles dry, clean and free from oil and grease.
  12. Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools with the switch on invites accidents.
  13. Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.
  14. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.
  15. Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.

    TOOL USE AND CARE
  16. Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.
  17. Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.
  18. Do not use tool if switch does not turn it "ON" or "OFF". Any tool that cannot be controlled with the switch is dangerous and must be repaired.
  19. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.
  20. Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.
  21. Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edge are less likely to bind and are easier to control. Do not use a damaged tool. Tag damaged tools "Do not use" until repaired. Any alteration or modification is a misuse and may result in a dangerous condition.
  22. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool's operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.
  23. Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool, may become hazardous when used on another tool.

    Service - Never try to service rented equipment. If your tool malfunctions, call your rental dealer immediately.

We know your business success depends on reliable quality equipment and parts to continue being a leader in your industry. When you want Genuine Milwaukee original equipment parts, accessories and equipment you can always depend on Discount-Equipment.com to come through with the genuine o.e.m. products you need as quickly and inexpensive as possible. Our sales staff combined experience consists of over 90 years in the construction parts and equipment industry. We have over 1 million items online, if you are having trouble finding your item, we also have the resources to help you find what you need, our industry leading web site includes thousands of parts and service manuals available to look up your items. If you don't find what you are looking for please fill out our parts request form here.


 Milwaukee Electric Tool Corp. 9075-20 3/4 Manual
 Milwaukee Electric Tool Corp. 9068 Wrench and Kit Safety Instructions
 Milwaukee Electric Tool Corp. 9068 Wrench and Kit Safety Instructions
 Milwaukee Electric Tool Corp. 9068 Wrench and Kit Safety Instructions
 Milwaukee Electric Tool Corp. 6850 18-Gauge Shears Safety Instructions
 Milwaukee Electric Tool Corp. 6850 18-Gauge Shears Safety Instructions
 Milwaukee Electric Tool Corp. 6850 18-Gauge Shears Safety Instructions
 Milwaukee Electric Tool Corp. 6758-6 Drywall Screw Shooter Safety Instructions
 Milwaukee Electric Tool Corp. 6758-6 Drywall Screw Shooter Safety Instructions
 Milwaukee Electric Tool Corp. 6758-6 Drywall Screw Shooter Safety Instructions
 Milwaukee Electric Tool Corp. 6537-6 Super Sawzall Safety Instructions
 Milwaukee Electric Tool Corp. 6537-6 Super Sawzall Safety Instructions
 Milwaukee Electric Tool Corp. 6537-6 Super Sawzall Safety Instructions
 Milwaukee Electric Tool Corp. 6524-21 Sawzall - The Hatchet® Reciprocating Saw Owner's Manual
 Milwaukee Electric Tool Corp. 6519-22 Reciprocating Saw User_Manual
 Milwaukee Electric Tool Corp. 6509-31 Operators Manual
 Milwaukee Electric Tool Corp. 6494-6 Compound Miter Saw Safety Instructions
 Milwaukee Electric Tool Corp. 6494-6 Compound Miter Saw Safety Instructions
 Milwaukee Electric Tool Corp. 6494-6 Compound Miter Saw Safety Instructions
 Milwaukee Electric Tool Corp. 6266-22 Top Handle Orbital Jig Saw Owner's Manual
 Milwaukee Electric Tool Corp. 6238-21 Operators Manual
 Milwaukee Electric Tool Corp. 6232-6 Portable Band Saw Safety Instructions
 Milwaukee Electric Tool Corp. 6232-6 Portable Band Saw Safety Instructions
 Milwaukee Electric Tool Corp. 6232-6 Portable Band Saw Safety Instructions
 Milwaukee Electric Tool Corp. 6225 Owner's Manual
 Milwaukee Electric Tool Corp. 6176-20 14 in. Abrasive Cut-Off Machine Operators Manual
 Milwaukee Electric Tool Corp. 6176-20 Operators Manual
 Milwaukee Electric Tool Corp. 6175-6 Abrasive Cut-Off Saw Safety Instructions
 Milwaukee Electric Tool Corp. 6175-6 Abrasive Cut-Off Saw Safety Instructions
 Milwaukee Electric Tool Corp. 6175-6 Abrasive Cut-Off Saw Safety Instructions
 Milwaukee Electric Tool Corp. 6068-6 7-inch Sander, Grinder Safety Instructions
 Milwaukee Electric Tool Corp. 6068-6 7-inch Sander, Grinder Safety Instructions
 Milwaukee Electric Tool Corp. 6068-6 7-inch Sander, Grinder Safety Instructions
 Milwaukee Electric Tool Corp. 6018-6 5 in. Random Orbit Palm Sander Owner's Manual
 Milwaukee Electric Tool Corp. 5460-6 7-inch, 9-inch Polisher Safety Instructions
 Milwaukee Electric Tool Corp. 5460-6 7-inch, 9-inch Polisher Safety Instructions
 Milwaukee Electric Tool Corp. 5460-6 7-inch, 9-inch Polisher Safety Instructions
 Milwaukee Electric Tool Corp. 5378-21 1/2 in. Pistol Grip Dual Torque Hammer-Drill Owner's Manual
 Milwaukee Electric Tool Corp. 5371-6 Magnum Hammer Drill Safety Instructions
 Milwaukee Electric Tool Corp. 5371-6 Magnum Hammer Drill Safety Instructions
 Milwaukee Electric Tool Corp. 5371-6 Magnum Hammer Drill Safety Instructions
 Milwaukee Electric Tool Corp. 5368-6 Rotary Hammer Kit Safety Instructions
 Milwaukee Electric Tool Corp. 5368-6 Rotary Hammer Kit Safety Instructions
 Milwaukee Electric Tool Corp. 5368-6 Rotary Hammer Kit Safety Instructions
 Milwaukee Electric Tool Corp. 5335 Tool Demolition Hammer Safety Instructions
 Milwaukee Electric Tool Corp. 5335 Tool Demolition Hammer Safety Instructions
 Milwaukee Electric Tool Corp. 5335 Tool Demolition Hammer Safety Instructions
 Milwaukee Electric Tool Corp. 5311-6 Rotary Hammer Kit Safety Instructions
 Milwaukee Electric Tool Corp. 5311-6 Rotary Hammer Kit Safety Instructions
 Milwaukee Electric Tool Corp. 5311-6 Rotary Hammer Kit Safety Instructions
 Milwaukee Electric Tool Corp. 5243 Grinder Operation_Manual
 Milwaukee Electric Tool Corp. 5196 Grinder Operation_Manual
 Milwaukee Electric Tool Corp. 4262 Operators Manual
 Milwaukee Electric Tool Corp. 4262 Operators Manual
 Milwaukee Electric Tool Corp. 4203 Drill Press Base Drill Press Owners Manual
 Milwaukee Electric Tool Corp. 4096 Coring Drill Core Drill Machines Brochure
 Milwaukee Electric Tool Corp. 4096 Coring Drill Core Drill Machines Brochure
 Milwaukee Electric Tool Corp. 4096 Coring Drill Core Drill Machines Brochure
 Milwaukee Electric Tool Corp. 3107-6 Right Angle Drill Safety Instructions
 Milwaukee Electric Tool Corp. 3107-6 Right Angle Drill Safety Instructions
 Milwaukee Electric Tool Corp. 3107-6 Right Angle Drill Safety Instructions
 Milwaukee Electric Tool Corp. 1854-1 Super Hole Shooter Safety Instructions
 Milwaukee Electric Tool Corp. 1680-21 1/2 in. Super Hawg with Carrying Case Owner's Manual
 Milwaukee Electric Tool Corp. 1676-6 Hole Hawg Safety Instructions
 Milwaukee Electric Tool Corp. 1676-6 Hole Hawg Safety Instructions
 Milwaukee Electric Tool Corp. 1676-6 Hole Hawg Safety Instructions
 Milwaukee Electric Tool Corp. 1660-6 Heavy Duty Hole Shooter Safety Instructions
 Milwaukee Electric Tool Corp. 0622-20 18V 1/2 in. Lok-Torâ„¢ Driver/Drill Owner's Manual
 Milwaukee Electric Tool Corp. 0375-6 Heavy Duty Hole Shooter Safety Instructions
 Milwaukee Electric Tool Corp. 0375-6 Heavy Duty Hole Shooter Safety Instructions
 Milwaukee Electric Tool Corp. 0375-6 Heavy Duty Hole Shooter Safety Instructions
 Milwaukee Electric Tool Corp. 0300-20 1/2 in. Magnum® Drill, 0-850 RPM Owner's Manual
 Milwaukee Electric Tool Corp. 0234-6 1/2-inch Magnum Drill Operators Manual
 Milwaukee Electric Tool Corp. 0201-20 - 3/8 in. Magnum® Drill, 0-2500 RPM Owner's Manual



Power Trowels

Picture of Walk Behind Power trowel

Shopping Cart

Your cart is empty


Manufacturer/Brand


Equipment Type




Over 32 Years of Serving the Industry